Buying a Hot TubMaintenanceHot Tub TipsTroubleshootingHealth + Fitness

Alkalinity: How To Control The PH Level of Your Hot Tub

This blog post may contain affiliate links.

In this comprehensive guide, we’ll break down everything you need to know about controlling the pH level of your hot tub. From understanding the basics of pH to practical tips for achieving that perfect balance, we’ve got you covered.

Understanding Hot Tub PH levels and alkalinity

pH, which stands for “potential of hydrogen,” is a measure of the acidity or alkalinity of a substance, in this case, the water in your hot tub. The pH scale ranges from 0 to 14, with 7 considered neutral. A pH below 7 indicates acidity, while a pH above 7 indicates alkalinity.

In the context of your hot tub, pH level is crucial for several reasons:

  1. Comfort: The pH level of your hot tub directly impacts your comfort while soaking. Water that is too acidic or too alkaline can cause skin irritation, eye irritation, and discomfort. Achieving the optimal pH level ensures a relaxing and enjoyable experience.

  2. Sanitation: Proper pH balance is essential for effective sanitation in your hot tub. If the pH level is too low (acidic), chlorine or other sanitizers become more potent, leading to potential skin irritation and corrosion of the tub components. On the other hand, if the pH level is too high (alkaline), the sanitizing agents become less effective, allowing bacteria and other contaminants to thrive.

  3. Water Clarity: pH level also influences water clarity. Imbalanced pH levels can result in cloudy or murky water, making it less visually appealing and indicating potential water quality issues.

  4. Equipment Longevity: Maintaining the correct pH level helps preserve the longevity of your hot tub equipment. Water that is too acidic can corrode metal components, such as heaters and pumps, while water that is too alkaline can lead to scale buildup and damage.

Recognizing High Alkalinity

High alkalinity often manifests itself in visible signs like cloudy water, scale formations, and staining on hot tub surfaces. Scale often appears as an off-white, crusty residue on the interior hot tub surfaces, typically along the water line. Over time, this can evolve into discolored stains, depending on the minerals, metals, body oils, and other contaminants present in the water.

Causes of High Alkalinity

High alkalinity is often a result of causes like excessive use of chemicals, sweat, lotions, perfumes, and other bodily fluids that enter the water. Additionally, your water source and human error can also contribute to high alkalinity levels.

Testing Your Hot Tub’s Alkalinity

Regular testing of your hot tub’s water is crucial to keep the alkalinity and pH levels in check. Home test kits are available as chemical test strips or liquid test kits.

Chemical test strips work by submersing the paper strip in the water for a few seconds. Less than a minute later, the different markers (bands) on the strip will change color. Comparing these to the color key on the strip container will reveal if your hot tub is off-balance.

Liquid test kits, on the other hand, involve capturing a vial of hot tub water, adding drops of testing agent to it, waiting for the water to change color, and comparing it to the color key.

For more precise results, it’s recommended to have your hot tub water professionally tested every few weeks.

Lowering Alkalinity in Your Hot Tub

Lowering the TA in a hot tub involves adding chemicals specifically made to reduce that number. These are granular or liquid products that you pour into the hot tub after testing the water. After adding the chemicals, turn the hot tub jets on and leave it to circulate, typically for around 30 minutes. Then test the water again, and repeat the process until you reach the right balance.

Steps to Lower Alkalinity in Your Hot Tub

The following steps will guide you through the process of lowering the alkalinity of your hot tub:

  • Test the alkalinity: Use a test strip to determine the alkalinity of your hot tub water. Compare the color on it with the colors indicated on the kit.
  • Add the chemicals: If your hot tub water has high alkalinity, you need to lower the level by using chemicals such as liquid muriatic acid or sodium bisulfate. The proportions should be read properly before adding them to the water.
  • Circulate the water: After adding the correct amount of chemicals, circulate your tub and pour the sodium bisulfate in the hot tub.
  • Let the water breathe: Leave the hot tub open for an hour for the water to breathe properly. Test the water again. If the alkalinity is not lowered, repeat the process.
  • Check the pH levels: Once you achieve the desired alkalinity, test the water again after 24 hours. Then, check the pH levels with pH test strips to see if it needs balancing.

Balancing pH and Alkalinity

Balancing the alkalinity and pH levels in your hot tub is akin to maintaining a harmonious relationship. When TA is unbalanced, the pH level will not only fluctuate rapidly but can also be difficult to get back into balance.

When you try to lower the alkalinity, the pH will drop faster. So, it’s important not to go overboard with the chemicals and to carry out the process little by little.

Lowering pH Levels Without Chemicals

If you prefer a more natural approach, you can lower the pH level of your hot tub water using vinegar. To do this, pour four cups of vinegar into the water, ensuring that the water in the tub is circulated before pouring. After a few hours, turn off the jets and test the water. Repeat the process until you reach the appropriate level.

What Happens If PH Is Too Low In Hot Tub?

If the pH in your hot tub is too low it can cause several problems.

The first is that it can make the water feel slimy and uninviting.

This is because the low pH makes it harder for the water to hold onto dissolved minerals so they tend to fall out of the solution making the water feel less pleasant.

The second problem is that low pH can also lead to the build-up of calcium carbonate in the pipes and other parts of the hot tub.

This can eventually clog the pipes and lead to costly repairs.

Finally low pH can also make it difficult to maintain proper chlorine levels in the water.

This is because chlorine is less effective at killing bacteria and other organisms at lower pH levels.

As a result you may find that your hot tub needs to be chlorinated more frequently which can be a hassle and expense.

How Do I Raise The PH In My Spa Naturally?

There are several factors that can contribute to pH imbalance in a spa including the use of harsh chemicals changes in temperature and evaporation.

But don’t worry there are a few simple things you can do to raise the pH in your spa naturally.

One of the easiest ways to raise the pH in your spa is to add baking soda to the water.

Baking soda is a naturally alkaline substance that will help to raise the pH of your spa water.

Simply add one pound of baking soda for every 100 gallons of water in your spa.

If you find that your spa’s pH levels are still out of balance you may need to add a little bit of acid to the water.

This can be done by adding a small amount of vinegar or lemon juice to the water.

Start with a half cup of acid for every 100 gallons of water and increase the amount until you reach the desired pH level.

In addition to these simple tips there are a few other things you can do to keep your spa’s pH levels balanced.

Be sure to test your spa water regularly and make adjustments as needed.

And if you find that your spa’s pH levels are consistently out of balance it’s a good idea to consult with a professional to find out what’s causing the problem and how to fix it.

Can I Use Baking Soda To Raise Spa PH?

You can use baking soda to raise the pH of your spa.

The reason that you would want to raise the pH of your spa is that it can help to prevent the growth of algae and other unwanted organisms.

Algae can not only make your spa look less than ideal but it can also clog filters and make the water harder to circulate.

To raise the pH of your spa with baking soda simply add one pound of baking soda per 100 gallons of water.

You can add the baking soda directly to the spa water or you can dissolve it in a bucket of water and then add it to the spa.

If you find that the pH of your spa is still too low after adding baking soda you can also add an acidic chemical to the water.

The most common chemical used for this purpose is muriatic acid which can be found at most hardware stores.

To use muriatic acid simply add one pint of acid per 100 gallons of water.

Make sure to wear gloves and eye protection when working with muriatic acid as it can be corrosive.

Once you have added either baking soda or muriatic acid to your spa you will need to run the spa for at least an hour to circulate the water and allow the chemicals to do their job.

After running the spa you should test the pH of the water to make sure that it has been raised to the desired level.

If it has not you can add more of either the baking soda or muriatic acid.

It is important to remember that you should never add more than the recommended amount of either chemical to your spa as this can be dangerous.

How Do I Adjust The PH In My Hot Tub?

There are a few different ways to adjust the pH in your hot tub but the most common and effective method is to use a pH increaser or decreaser.

These products are available at the most pool and spa supply stores and they can be added directly to your hot tub water.

If you’re not sure how much pH increaser or decreaser to use it’s always best to start with a small amount and then adjust as needed.

It’s also important to make sure that you’re mixing the product well before adding it to your hot tub as this will help to ensure even distribution.

Once you’ve added the pH increaser or decreaser to your hot tub water you’ll need to run the jets for a few minutes to help circulate the water and distribute the product evenly.

After the jets have been running for a few minutes you can then check the pH levels using a test kit.

If the pH levels are still not where they need to be you can repeat the process until the desired levels are reached.